API New Kingdream 8 1/2" Steel Tooth Bit

API New Kingdream 8 1/2" Steel Tooth Bit 20years experience in drill bit manufacture API&ISO9001 certification

API New Kingdream 8 1/2" Steel Tooth Bit 

As the professional supplier of rock bits in China,we can supply all kinds of rock bits,such as PDC bits,TCI bits,rock bits,tricone bits,single cone bits,multicone bits,steel tooth bits,insert tooth bits,roller bits,drill bits,drilling tools,etc.

1 Covers almost all IADC codes

2 Durability of premium tungsten carbide insert

3 Reliable bearing and lubrication system

Steel tooth bit

IADC 116Soft to Medium FormationsThe bits is the fastest tricone drilling bit offered by Bit Brokers. This steel tooth bit model is designed with long "A" shaped teeth, widely spaced and fully hard faced from crest to root for maximum penetration rates in formations that range from moderately soft to medium soft. This design is most effective in formations with compressive strengths under 5,000, such as shale, clay, red bed, medium limestone and unconsolidated formations. The bit also features the absence of deletions on the gage side of teeth on the heel row of the number two cone. This insures maximum gage life along with tooth life in more abrasive formations. Effective operating weights are from 1,000 to 3,000 pounds per inch of bit diameter with corresponding rotary speeds of 200 to 50 RPM.

IADC 216Medium To Medium-Hard FormationsThe bits offers the combination action of chipping, crushing, and gouging/scraping provided because of reduced cutter offset. The teeth are shorter "A" shaped and more closely spaced teeth than those of bits designed for softer formations. Long crests in the outer row teeth have self-sharpening hard facing applied for maximum penetration and longer bit life. This design will most economically drill medium and medium hard formations and was designed to replace the softer formation bits in strata where shale alternates with streaks of limestone and sandstone or where gypsum tends to ball up between the teeth. The most effective weight range varies from 1,000 to 5,000 pounds per inch of bit diameter, while rotary speeds of 150 to 50 RPM give best performance. Rotary speed should be decreased as weight is increased.

IADC 316Hard FormationsThe bits operates best in hard, abrasive formations such as hard sandy limestone, limestone interspersed with cherty streaks, broken shale, dolomite, granite, and abrasive sand. This bit is especially constructed to withstand the stresses imposed in drilling hard formations under heavy weights. The gage teeth are hard faced with tungsten carbide. There are no interruptions on the heel row teeth and the inner row teeth are short and closely spaced for maximum strength. Other features include balanced bearing design and extra thick cone shells. The most economical bit performance is obtained with weights of 3,000 to 8,000 pounds per inch of bit diameter. Corresponding rotary speed should range between 100 and 40 RPM. It is a recommended practice that the rotation speed should decrease when increasing drilling weight.

IADC 321Very Hard FormationsHard, abrasive formations requiring maximum resistance to gage wear are best drilled with the bits. The bit provides the necessary chipping and crushing action on bottom and drills efficiently in formations such as siliceous limestone, dolomite, sandstone, and granite. The gage surfaces of the cones have webs joining adjacent heel teeth, which insures great resistance to wear. Inner row teeth are short and closely spaced to withstand maximum stress. This bit is designed to drill most efficiently in hard formations with weights ranging from 3,000 to 8,000 pounds per inch of bit diameter. Rotary speeds should decrease from 100 to 40 RPM as weight is increased.

Model	TCI BIT, STEEL TOOTH BIT
IADC CODE	116 117 126 127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347
	417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447 516 526  537 547 516 536  535
available sizes	From 2 7/8 “to 26” larger sizes for hole opener bit ,reamer bit
advantage	most favourable price and best qualtity
bearing type:	sealed bearing and non-sealed bearing HJ(metal sealed journal bearing)   HA (rubber sealed journal bearing aircooled bearing type
Formation or layer	soft ,medium soft ,hard,medium hard,very hard formation
Button size (extra features)	Button bit,saw teeth 1) Y-Conical teeth  2) X-chisel teeth 3)K- wide teeth 4)G- Gague protection
Material	Alloy steel ,carbide
Market	Canada, USA,Middle east ,Africa,Europe

API New Kingdream 8 1/2" Steel Tooth Bit